Choose PVC Heavy Duty Gloves in 4 Steps

PVC gloves are usually more abrasion-resistant and durable than gloves made of other materials and have good chemical resistance, so they are common in workplaces where liquid chemicals are handled, such as chemical plants, laboratories, janitorial services, etc. In this article, we’ll cover the 4 steps to follow to pick the right chemical gloves.

Choose PVC Heavy Duty Gloves in 4 Steps | ETERNITY SAFETY

Step 1: Assess potential risks

Do your hands frequently come into contact with water or other liquids, such as leaks, splashes, or other accidents? What substances or products do they come into contact with? How long does it take for these liquids to come into contact with the hands each time? Is it possible to withstand a certain degree of mechanical damage?

The most common factors that affect your choice are:

The chemicals you are using (acid, alkali, solvent, etc.).

The concentration and toxicity of chemicals.

The time and frequency of your exposure to this chemical substance.

The ways in which employees come into contact with chemicals (splashing, blasting, immersion, etc.).

The length of your gloves.

Fingers are sensitive and comfortable to grip.

The size of the gloves.

PVC (polyvinyl chloride)

Polyvinyl chloride has become the perfect choice for various workplaces due to its excellent cost-effectiveness. These gloves are perfect for working in acidic and alkaline environments, as well as for repair and maintenance work in humid environments. For those who use substances such as hydraulic oil, aromatic solvents, or alcohol, they are also a good choice.

PVC gloves provide excellent grip and wear resistance.

However, if you are looking for protection against organic solvents, it is best not to choose polyvinyl chloride. In addition, due to poor heat resistance, this material is not suitable for high-temperature environments.

Suitable industries and applications:

Fishery maintenance, mining fuel and oil machinery construction, petroleum chemicals.

Step 2: Level of protection and comfort.

In this table you will find three important elements that have been extensively tested in accordance with the EN 374 safety standard:

Breakthrough time

Protection index from 1 to 6

Degradation (expressed as a percentage)

Measured Breakthrough Time Protection Index
10 minuten 1
30 minuten 2
60 minuten 3
120 minuten 4
240 minuten 5
480 minuten 6

Breakthrough time

The rate at which a chemical penetrates a glove at the molecular level. The counter stops when the amount reaches 1.0µg/cm²/min.

The result is the number of minutes. The higher the result, the longer it takes to reach this speed.

It is possible that although the chemical has penetrated, the penetration rate has not yet been reached. This dormant effect is harmful long term with extreme toxins.

Protection Index

This index shows the penetration rate of a glove that protects against a wide range of chemicals.

The higher the index, the longer the breakthrough time and the better the protection of the glove.

If the glove is chlorinated, it is easier to put on and take off. This eliminates the need for the glove to be made thinner.

Flocking means that the inside is lined with textile fibers that absorb sweat well. This is ideal for regular use.

Finally, some gloves have a special knitted lining for added comfort:

Cotton provides insulation and absorbs perspiration.

Polyamide is very fine and seamless for optimal fingertip sensitivity.

Para-aramids offer very high cut and heat resistance.

HDPE (High Density Polyethylene) is cut resistant and very flexible.

Step 3: How much grip do you need at work?

Smooth gloves are suitable for many situations. However, they are usually not suitable for contact with objects with smooth surfaces.

For example, in oily environments a high level of grip is required from the gloves.

In addition, textured gloves provide extra grip when working in wet environments.

The thickness of chemical gloves varies between approx. 0.05 mm and approx. 2.5 mm.

The most important thing is the effect on sensitivity and comfort. If someone needs to wear gloves for an extended period of time, thicker gloves will be more comfortable. However, please note that you need to wear chemical resistant gloves for as short a time as possible.

Step 4: Choose the right size

Last but not least: what size should you get? Too small a size will bind your hands and your gloves will wear out faster.

Use a soft ruler or tape measure to measure your hand size. Place the tape measure around the widest part of your hand, usually at the knuckles, and record the circumference of your hand.

The length of the fingers should also be measured, from the base of the palm to the tips of the fingers. These measurements can help determine the most appropriate glove size.

Most safety glove manufacturers provide sizing charts that list the correspondence between different sizes and hand dimensions. Based on the measurements, find the closest size in the sizing chart. If the hand size falls between two sizes, it is recommended to choose the larger size to ensure that the gloves are not too tight.

Choose PVC Heavy Duty Gloves in 4 Steps | ETERNITY SAFETY